Temporary Fencing

Business, Temporary Fencing

How to build a wooden fence like a mountain fence?

How to build a wooden fence like a mountain fence?

The wooden fence , typical of the mountains, is nothing more than a series of modules that are repeated. Choose cypress, juniper or aromatic cedar because they do not rot easily and are not affected by parasites.

The entire structure must be supported by the uprights, which are the main elements and require holes that melt at least 50-60 cm. They must then be about 10 cm higher than the entire fence. While the distance of the fence from the ground is recommended to be 5 cm.

Secure the posts in the holes with concrete. While this dries, secure the battens to the crossbars with wood screws and L-brackets, making sure they are at the same height. Do this by modules. To mount the fence it would be better to be two people. Then mount the gate, making sure it is well aligned (use the spirit level). Mount the hinges on the uprights, taking care to make marks where the holes will be made. You can choose whether to put a closing and opening mechanism for the gate. Once you have completed all the work remember to pass the impregnating agent.

Firmly tie the end of the pole with a round of iron wire that helps prevent the phenomenon of cracking, i.e. the detachment of the wood fibers in the longitudinal direction.

Business, Temporary Fencing

How to plant fence posts for a fence?

If you need to create a fence and you don’t know how to proceed to avoid doing a bad job … trust our advice!

The support posts of a fence must be firmly fixed to the ground so as not to fall in case of strong wind and precipitation.

First of all, wear protective gloves and goggles to avoid getting hurt. Bring all the materials you need to the place where you need to erect the fence.

Create a hole in the ground using a hand drill. Usually the poles, both wooden and metallic, already have a point to be fixed to the ground; if not, make sure that your wooden posts are pointed.

A tip: if you have to plant many poles, it may be advantageous to use earth augers that evenly move the ground at the same depth, so that the fence posts can then be planted more easily and precisely.

If possible, choose chestnut or similar stakes, beat them with a strong and heavy club, planting them at least 30 – 40 cm deep.

Prepare for work

Take two poles and temporarily pin them to the ground at the distance you want, then pin a wire at either end. Proceed to make the holes following the thread, if you want you can add gravel in the holes.

In case you need to use posts for a metal fence, then these will already be prepared with the right holes. If you want the posts to be fixed firmly, you can fix them with concrete in the holes. To make the operation successful, wet the holes with water.

Refine the poles with a chainsaw in order to remove the pieces of wood flaked by the beating, which could cause the weakening of the pole and facilitate the rotting process with infiltration of rainwater.